Mi Flash Pro is an official program from Xiaomi developers, designed to flash Xiaomi, Redmi and POCO phones in Fastboot mode. Mi Flash Pro can download the firmware, install it without unlocking the bootloader, reset the authentication settings if you forget the pattern key.
Utility works with Qualcomm Snapdragon and MediaTek processor-based phones and tablets. For different processors there are firmware applications as part of the program — SP Flash Tool for MTK and Mi Flash for Qualcomm.
Mi Flash Pro error solution:
Utility works with Qualcomm Snapdragon and MediaTek processor-based phones and tablets. For different processors there are firmware applications as part of the program — SP Flash Tool for MTK and Mi Flash for Qualcomm.
Mi Flash Pro error solution:
- Current device antirollback version is greater than this package. The user is trying to install a too old version of MIUI, the rollback to which is prohibited by the manufacturer. Please install the latest MIUI version.
- Flashing is not allowed in lock state. Flashing can not be installed because the bootloader is locked. You should unlock the bootloader and perform the procedure again.
- Reached the end of the file 0x80070026. This error usually occurs if you use an old version of Mi Flash Pro. Download the latest version of the application.
- Cannot receive hello packet. This error often occurs with Windows 7 and 8. The problem is related to a specific USB port. You need to switch the phone to another USB 2.0 port.
- The specified file cannot be found 0x80070002. Program can’t find certain file in ROM. Usually flash_all.bat is lost, you need to download the ROM again and unzip it.
- Unspecified error 0xffffffffffff. The error can occur if the firmware file was downloaded anew. You need to specify the path to the flash_all.bat file yourself.
- Try to move the firmware directory to the system drive. Also, the error appears if there are non-Latin characters in the directory path.
- 0x80004005 FAILED (remote: unknown command). Most likely, the user downloaded the wrong firmware. You will need to download a ROM for the specific model and perform the procedure again.
- Failed Remote: Partition Flashing Is Not Allowed. This is another Flash Pro error telling the user that the bootloader is blocked and therefore flashing is impossible.
- Flash crclist error. The unpacked archive contains errors. Often this happens if you use WinRAR to unpack. In case of flash files it’s better to use 7-Zip or standard Windows archiver.
- Cannot found file flash_all.bat. The program is unable to find the script required for the firmware installation. You need to set the path to the flash_all file manually.
- Cannot fund file flash_all_lock.bat. Appears when trying to flash ROM and lock the bootloader at the same time. It’s necessary to specify the program the path to the needed script.
- Cannot find flash script. Incorrect directory with unpacked flash file is specified. Correct directory.
- ACK don’t match. Often occurs when the user is trying to install the firmware for Recovery in Fastboot mode. Check the downloaded archive once again and upload another firmware if necessary.
- Flash TZ error. Error indicates that the user is trying to install a Chinese version of MIUI. It is necessary to download the MIUI Global.
- You are not authorized. Some user action requires authentication to the Mi account.
- Flash Partition Error. To fix this error you will need to unlock the bootloader and do not select flash_all_lock during flashing, otherwise it will lock again.
- Not catch checkpoint. In case of this error you will need to try to flash the handset via Test Point. Activate EDL mode on the phone.
- Cannot read flash port com. To fix the error connect the phone to a USB 2.0 port (if you used USB 3.0). If that doesn’t help, you should try to install the firmware via EDL.
- Ping target via firе. Reboot your computer and then run the firmware procedure again.
- Cannot load programmer file. Make sure you have downloaded the firmware Fastboot ROM (TGZ archive format). Also make sure that you unpacked the archive correctly.
- Flash xbl error. This is a “universal” error which can mean anything. Check if the downloaded firmware corresponds to your smartphone model, if it was unpacked correctly and if the boot loader status is correct.