SP Flash Tool error solution:
- s_ft_download_fail 4008 — Firmware installation error. Can be resolved by using previous software versions, changing the USB cable or charging the handset fully. Sometimes Hard Reset helps.
- error 6029 — driver problem. Simple solution is to reinstall ADB driver for MTK and VCOM/PRELOADER driver.
- error 4032 — incorrect PRELOADER unit. Try changing the software version. You may also try shortening pin 4 and pin 5 of the USB connector. If the battery charge level is less than 20%, consider charging the battery.
- error 8417 — you need to change the path to the SCATTER file so that it contains only Latin characters (no other characters are supported).
- error 2004 — try to close the error window and immediately press Download again. If that did not help, try to connect the device to PC with the volume up or down button pressed.
- error 8038 — change the version of SP Flash Tool or correct the SCATTER file so that it is identical to the one used in the firmware.
- error 2005 — when selecting Download, you need to uncheck the dsp_bl option. If this option is required, you need to connect the machine in BOOTROM mode. Also try disconnecting and reconnecting the battery (if possible).
- error 4001 — change the USB port the phone is connected to or move the firmware directory to the root of the C drive.
- error 1022 — use an older SP Flash Tool. Previous versions can be downloaded from the links above.
- error 1042 — BROM error. You can try the latest version or changing your computer. The problem may also be caused by a faulty USB cable.
- error 1058 — connect your smartphone to a USB 2.0 port (do not connect to USB 3.0).
- error 6045 — try using SP Flash Tool version 5.1532.
- error 8406 — Internal application error. You need another version (known to work).
- error 4058 — There is a hardware problem with the flash memory. Chip needs to be replaced.
- s_ft_enable_dram_fail 4032 — you can try to format the phone, reinstall drivers, change the software version, charge the battery, flash the phone via Test Point.
- checksum error 1041 — clear the program logs and delete the Checksum.ini file. Repeat the flashing process after that.
- not enough storage space — the error indicates insufficient memory space. You need to format the phone.
- status insufficient buffer — try changing firmware version (better to use an older version).
- microsoft visual C++ runtime error — reinstall the Microsoft Visual C++ package, reboot the computer. Try flash the phone again.