What's new
Mobilforum.uz

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON

NewsMaker

Staff member
Администратор
Infinity Chinese Miracle-2 #CM2MT2 v2.36 - general improvements and fixes

- SmartInfo parser output revised
- NVRAM parser output revised
- Firmware remote verification enabled
- Device remote verification enabled
- Preloader parser revised and fixed
- Peloader remote verification enabled
- "KG State" moved to Service page
- "Help" menu
- View log files by right mouse click on message window
- View log files via "File" menu
- "Logs" button at main window to view log files
- "Snap" button at main window to make screenshot
- "Stop" button at main window
- Verification for preloader|da|firmware integrity
- Show current settings at operation start
- Show "Local SLA" state at operation start
- Show "Flash Write" settings at operation start
- "HW Report" mode selection changed
- "Check Account" button at "Settings" page to verify Username and Password validity
- Loaders remote verification enabled
- Show loaders information at boot time
- Memory chip life-state warnings updated
- "Stop" item removed from the top menu
- Boot stage loader files information revised
- "GUI Mode" item removed from the top menu and moved to "View" button
- "Memory Tool" moved to "Service" page
- "Make Service Report" moved to "Service" page
- "Settings" -> "Firefy : EMI" menu item moved to "FireFly : AutoEMI" at "Settings" page
- "GUI mode" save/restore on startup
- "Change GUI mode" via "Settings" menu
- HW Compatibility Wizard enabled
- Server Hints engine enabled
- "PMT Info" option at "Platform" page display Partition Info during "Identify"
- "Save Boot Config" option at "Platform" page to store detected model config to models list
- Required Dongle firmware version: 0153

Gsmservice
#cm2
 

NewsMaker

Staff member
Администратор
Infinity Chinese Miracle-2 #CM2MT2 v2.37 - general improvements and fixes

- "Restore Backup" config mode updated
- "Restore Backup" allow to select files manually
- Flash file (Scatter) Open|Select|Clean buttons at "Flash" page
- Flash file (Scatter) parser updated
- Flash file (Scatter) selection issue fixes
- MemoryTool file selection issue fixes
- MemoryTool gui minor changes
- "Switch to HS USB" option removed
- Config storage engine updated
- Account Check gives balance and subscription date
- "PMT Info" config value stored
- "Flash" page minor gui changes
- Loaders remote verification revised
- Installer updated to manage previously installed boot-pack
- Required Dongle firmware version: 0153

Gsmservice
#cm2
 

NewsMaker

Staff member
Администратор
Infinity Chinese Miracle-2 #CM2MT2 v2.37 - general improvements and fixes

- "Restore Backup" config mode updated
- "Restore Backup" allow to select files manually
- Flash file (Scatter) Open|Select|Clean buttons at "Flash" page
- Flash file (Scatter) parser updated
- Flash file (Scatter) selection issue fixes
- MemoryTool file selection issue fixes
- MemoryTool gui minor changes
- "Switch to HS USB" option removed
- Config storage engine updated
- Account Check gives balance and subscription date
- "PMT Info" config value stored
- "Flash" page minor gui changes
- Loaders remote verification revised
- Installer updated to manage previously installed boot-pack
- Required Dongle firmware version: 0153

Gsmservice
#cm2
 

NewsMaker

Staff member
Администратор
Infinity Chinese Miracle-2 CM2MT2 v2.38 - general improvements and fixes

!!! WARNING !!!
Backup files storage structure changed, files and folders will be compressed.
Software will convert files and folders at first run!
If you have important data - make /backup/ folder copy for emergency case!
Process may takes time, BE PATIENT!

- Startup process revised
- Backup files are packed, zip and 7z formats are supported (7z.dll is required)
- Backup files default format is 7z
- Backup|Restore partitions list updated
- Backup overwrite request for "Identify" only, skip existing backup replacement for other operations
- Partition size verification during backup
- File content verification (zeroes) during backup creation
- File content verification (zeroes) during backup restore
- Display hw|sw info to log during backup file selection
- Restore backup images with .bin and .img extensions
- Legacy settings values removed
- MemTool work path save|restore
- MemTool window position save|restore
- MemTool ui changes
- Log window style customization
- HW Report behaviour changed depends on selected Platform
- Cloud: display hw|sw info about last connected device
- Cloud: get previously stored backup file
- Flash chip vendors list updated
- ufs parser revised
- emmc parser revised
- emmc failure detection improved
- nand parser revised
- Firmware read/write last selected path save|restore
- scatter file creation process rebuilded
- scatter file load process revised
- META mode connection method revised
- META mode info and device version output revised
- META mode memory leak fixed
- Check free disk space on startup
- Check free disk space on Flash Read
- Flash Read file selection method updated
- Flash Read process termination revised
- Backup before Reset in META mode
- Backup before Reset in Flash mode
- extcsd backup file content verification
- PMT (partition table) info output slightly changed
- PMT (partition table) info included to device.txt during backup
- Store device.txt with hardware and software info to backup
- Store device.txt with hardware and software info to firmware
- Store device.txt file as ini
- Store loaders config to device.txt file
- Verify backup presence before process
- Error messages and software hints updated
- More software hints for [Format] operations
- More messages in log about process flow
- [SMART RESET EXTRA] error handling revised to recover after error
- Create Screenshot [Snap] as .png instead of .bmp (quite compact)
- Device brand|model detection revised
- Updates checker rebuilded
- External update checker disabled
- External firmware uploader enabled
- [Stop] process revised
- Customs Settings -> EMI button extract prevoader from partition image on load
- MemTool selection mode for 128 Mb and 256 Mb in list
- MemTool file selection revised
- MemTool operations revised
- [Flash] page minor ui changes
- [Security] page minor ui changes
- [NVRAM Read] operation revised
- [NVRAM Write] operation revised
- NVRAM backup file format changed
- [Restore Backup] operation allow to select backup file
- [Restore Backup] has new restore mode [+preloader]
- Check free disk space before backup
- settings.ini new value [where] backup=backup\
- settings.ini new value [where] boot=boot\
- settings.ini new value [where] tools=..\tools\
- settings.ini new value [where] firmware=firmware\
- SC engine revised
- Files verification config option in [Settings] page
- Files verification for nvram backup enabled
- Memory management engine gsmservice
- [KG] moved to [Misc] section
- Dialogs texts revised. Message text will be visible in log window on selection
- Minor log text messages and ui changes
- Check required dll's on startup
- ssleay32.dll included to installer to improve compatibility
- 7z.dll included to installer
- /tools/iosFileUploader included to installer
- Required Dongle firmware version: 0153

Order here - www.Gsmservice.center
#cm2update
 

NewsMaker

Staff member
Администратор
1672033622533.png

Infinity Chinese Miracle-2 #CM2MT2 v2.39 - MT6789 [Helio G99] and more

Loaders updated:
/boot/0_generic/MT6781_Generic [LUCI]
/boot/0_generic/MT6789_Generic [LUCI]
/boot/Infinix/Infinix-G99-General
/boot/Infinix/Infinix-X676B
/boot/Tecno/Tecno-G99-General

General:
New protocol supported: [LUCI] - MT6781, MT6789, MT6895, MT6983 etc.
Supported:
SecurityRepair : Generic lines support for latest phones in both FLASH and META mode
FormatFS : SmartReset, SmartResetExtra - include reset settings, frp, privacy etc.
FirmwareReading : Factory-like, complete, safe firmware, compatible with MT2 and SPFT too
FirmwareFlashing : Correct, safe, factory and read firmware flashing support
Service : Service operations supported : Identify, NVRAM operations, MemoryTool, HW Info etc.

FormatFS:
Smart Reset updated: New types supported
Smart Reset updated: Android 11-12 specific changes
Smart Reset updated: A/B devices specific changes

Firmware reader:
NEXTGEN [LUCI] phones line support
Factory-like firmware reading now supported [LUCI]
XML-scatter generation now supported [LUCI]
Android 13 support activated [under test]
Android 12 support improved
Android 10-11 support rebuild
AB devices support complete rebuild. All known formats supported.
More accurate detection of vendor-specific partitions and handling
Escape from OTA issues and other startup faults etc. on some phones

Scatter creation for latest devices revised, more chip-depend versions now supported

Firmware flasher:
NEXTGEN phones line support [LUCI]
Factory and Read firmware flashing now supported [LUCI]
XML scatter, TXT scatter and flash.xml can be used as FlashFile input

Service:
Identify : Now read active system info if device belong to AB
BootLoader: Unlock and Lock as separate buttons now
BootLoader: Unlock in FireFly mode for LEGACY phones has been fixed
BootLoader: Unlock in FireFly mode for some of RAPHAEL phones has been fixed
MemoryTool: LUCI support, compatibility improvements

The Rest:
- Loaders storage structure updated
[built-in] /boot/0_base/X_FireFly/ => /boot/XFireFly/base/
[boot-pack] /boot/0_base/MT6570_*/ => /boot/0_rare/MT6570_*/
[boot-pack] /boot/0_base/MT6771/ => /boot/Vivo/MT6771/
- Loaders package updated
[built-in] /boot/0_base/base_v2216/
- Bases and Models list sort order revised
- Firmware version parser revised
- Error messages and usage hints updated
- eMMC EOL status hints updated
- Update checker revised

Order here - www.Gsmservice.center
#cm2update
 

NewsMaker

Staff member
Администратор
Infinity #CM2MT2 boot-pack v2.40 with updated loaders

Loaders & structure updated

[+] Condor
[+] Dlight
[+] Xiaomi/Redmi-9c/ linked to base-2112 + preloader file from /Redmi-9/
[+] Xiaomi/Redmi-9a/ updated with preloader file from /Redmi-9/
[+] legacy loaders moved to /0_rare/
[+] /0_base/v17xx/ moved to boot-pack
[+] /0_base/v18xx/ moved to boot-pack
[+] /0_base/v19xx/ moved to boot-pack
[+] /0_base/v20xx/ moved to boot-pack

CM2MT2 v2.39 and higher should be used with the next loaders:
[+] Infinix/Infinix-G99-General/
[+] Infinix/Dimensity-9000/
[+] Infinix/X676B/
[+] Tecno/Tecno-G99-General/
[+] Tecno/Dimensity-9000/
[+] Tecno/Phantom-X2-X2Pro/
[+] /0_generic/ loaders for latest MT6781/MT6789/MT6983 are inside sw installer

Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders

Order here - www.gsmservice.center
#cm2
 

NewsMaker

Staff member
Администратор
1676271329130.png

Infinity Chinese Miracle-2 #CM2MT2 v2.41

General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes

Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated

User Interface:
- log management engine updated
- software messages revised

Dongle firmware version required: 0154

Order here - www.Gsmservice.center
#cm2update
 

NewsMaker

Staff member
Администратор
1676354974364.png

Infinity Chinese Miracle-2 #CM2MT2 v2.42

General:
- Maintenance release
- Memory management improved
- Many internal changes
- Boot time flow process updated
- Boot time error handling improved

User Interface:
- flash chip info output revised
- software messages & hints update

Order here - www.Gsmservice.center
#cm2update
 

NewsMaker

Staff member
Администратор
Infinity Chinese Miracle-2 #CM2MT2 v2.43

General:
- Device/Firmware detection method updated
- Boot process flow slightly changed
- Boot/Shutdown process updated
- Partition table analyzer rebuilded (primary/secondary)
- Service operations updated - red/orange state and bootloader unlock
- Bootloader lock/unlock process flow updated
- Service Report revised
- FileSystem type output revised
- Device handling Strategy type output revised
- scat load & emi management for "flash write" revised
- MemoryTool operations revised and bugs with menu selection fixed
- Security values processing updated
- META mode output revised
- Preloader parser revised
- EMI handling for legacy devices fixed
- Internal changes - memory management and more

User Interface:
- FLASH/META mode selection changed
- DA Protocol selection changed
- Software messages & hints updated

Order here - www.Gsmservice.center
#cm2update
 

NewsMaker

Staff member
Администратор
1684129251689.png

Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

General:
- Device info detection revised
- EMI processing for legacy hardware (f.e. MT6580) revised
- EMI database rebuilded
- Meizu operations revised
- New feature: Brom ON/OFF - allow enable BROM mode and allow do extended services such as:
All FireFly Features: Boot unlock, testing, service etc.
All FireFly DA features: Boot unlock, RPMB, service and other
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more

MemoryTool:
- Bulk Read/Write operations updated: selection and Read/Write path sync
- Read/Write file path handling method on file select/cancel revised
- Messages & errors|hints updated

Backup:
- Backup restore process updated with any record On|Off selection
- Select All/None items by right mouse click

User Interface:
- Startup window position config revised
- Software messages & hints updated

Order here - www.Gsmservice.center
#cm2update
 
Top